 |
 |
|
 |
|
| Atmospheric Evaporators |
 |
| |
APOLLO Atmospheric Evaporators are a simple, low cost means of complying with EPA regulations while recovering valuable dragout. Available in polypropylene, polyethylene, PVC and PVDF, these units can be used in a wide variety of applications. Two standard sizes are available with evaporation rates from 5 to 75 gallons per hour. By evaporating water from a process tank, additional volume is made available for some or all of the counterflowing rinse water and dragout. The process tank evaporation rate is increased by circulating the solution through the large surface area in the evaporative tank which is exposed to forced air. The APOLLO Atmospheric Evaporator can be utilized to reduce wastewater volume from storage tanks which significantly minimizes hauling costs.
Depending upon the application, the concentrate can be recycled or disposed of at greatly reduced costs resulting in higher profits. Zero discharge and closed loop systems offer reduced operating and treatment costs and avoid problems associated with environmental compliance. Systems are available to operate with steam, hot water, electricity, gas, or oil. |
|
| |
Typical Applications:
Waste Treatment Alternative
- Zero discharge eliminates waste water permitting and engineering costs
- Closed-loop designs save chemical costs, disposal costs and reduce liabilities
- Simple, low maintenance operation unlike complex waste treatment systems
|
| |
Film Processing & Printing
- Spent rinse water reduction
|
Plating and Anodizing
- Dragout chemical recovery
- Reduction of waste volumes
|
Machining
- Reduction of lubricant waste
|
|
|
|
Download Typical Systems Model #AP-24-PP
|
|
Assembled Systems
Skid-mounted systems are available with electric, steam, or gas heat. Electric and steam heated systems included polypropylene tanks as standards. Gas heated systems utilize stainless steel or titanium tanks. All assembled systems include tank, evaporator tower, stand, recirculation pump, heating systems, level control, and control enclosure.
|
| Electric Heated Systems |
| Model Number |
Evaporation Rate (GPH) |
Heat Capacity (Kw) |
Tank Size (feet) |
| EH-15-X |
5 |
15 |
5x2x2 |
| EH-30-X |
10 |
30 |
5x2x2 |
| EH-45-X |
15 |
45 |
5x2x2 |
| EH-60-X |
20 |
60 |
5x2x2 |
| EH-72-X |
24 |
72 |
6x3x3 |
X= Specify heating element and tank material, S= Stainless Steel 316, T= Titanium, F= Teflon.
- All heaters are 480 volt, 3 phase. Heater is mounted on tank bottom and digital indicating controller is supplied loose.
-
Systems including dual evaporator towers and other
heat sources are available upon request.
| Gas Heated Systems |
| Model Number |
Evaporation Rate |
BTU Input |
Tank Size (feet) |
| GH-20-X |
20 GPH |
255,000 |
5x3x3 |
| GH-30-X |
30 GPH |
325,000 |
5x3x3 |
| GH-60-X |
60 GPH |
765,000 |
5x3x3 |
X= Specify heating element and tank material, S= Stainless Steel 316, T= Titanium.
-
Natural gas or propane pressure to the gas train must be 7" w.c. or higher.
-
Water systems including dual evaporator towers and other heat sources are available upon request.
| Steam Heated Systems |
| Model Number |
Evaporaion Rate (GPH) |
Tank Size (feet) |
| SH-10-X |
10 GPH |
5x2x2 |
| SH-20-X |
20 GPH |
5x2.5x2 |
| SH-30-X |
30 GPH |
5x2.25x2 |
| SH-40-X |
40 GPH |
5x3.5x2 |
| SH-50-X |
50 GPH |
6x3.5x3 |
| SH-60-X |
60 GPH |
6x3.5x3 |
X= Specify heating element and tank material, S= Stainless Steel 316, T= Titanium, F= Teflon.
-
Heat exchange coils are sized based on 15 psi steam pressure. Other sizing available upon request. Heat exchanger is mounted on tank bottom and digital indicating controller is supplied loose.
- Water systems including dual evaporator towers and other heat sources are available upon request.
|
Burt Process Equipment, a leader in Atmospheric Evaporator, has been providing successful solutions to environmental problems for institutions and industrial firms since 1970.
Leaders named Burt Process Equipment in wastewater treatment technologies, has been providing successful solutions to environmental problems for institutions and industrial firms since 1970. Waste minimization and closed-loop recovery systems can often be utilized to eliminate the need for permitting and monitoring.
Single source responsibility provides by Burt Process Equipment including testing and design, fabrication, installation, start-up and preventative maintenance service. Burt can offer turnkey, high quality systems that are competitively priced through its extensive distribution products group, engineering department, and manufacturing division. Minimization and closed-loop recovery systems can often be utilized to eliminate the need for permitting and monitoring. Leaders named Burt Process Equipment in wastewater treatment technologies, has been providing successful solutions to environmental problems for institutions and industrial firms since 1970. From start to finish, Burt Process Equipment can provide sampling, feasibility studies, system design, fabrication, installation, start-up, training, and service. Working closely with customers, our highly trained engineers will study your requirements and offer a treatment technology or recovery system specifically tailored to meet your needs. and manufacturing division. Minimization and closed-loop recovery systems can often be utilized to eliminate the need for permitting and monitoring. Leaders named Burt Process Equipment in wastewater treatment technologies, has been providing successful solutions to environmental
- Reverse Osmosis
- Microfilteration
- DI Systems
Advanced Technology Designs for Process and Wastewater Treatment - ION Exchange
(c) Copyright 2005 Atmospheric Evaporator of Burt Process Equipment
|
|
 |
|
 |
|
